Installation
PCS W1 Kit
- 2.3 -
2.2.3 Transport cap
The motor is delivered with the oil filling cap, with the rubber part positioned, in order
to avoid lubricant leakages during the transport stage. This part must be removed
only during the installation stage.
Figure 2-3 – Cap with vent
2.2.4 Fastening
Six special aluminium bushes are provided for the correct motor fastening.
The motor must be fastened to the flange, using the bushes, bolts M8x80 and
standard M8 washers, as indicated on the following figure.
It is suggested to lock the bolts with a thread-lock product.
Tightening torque: 10 Nm.
Figure 2-4 – Details for the motor fastening
B
