8
regardless of any other mode. This mode takes priority over any other.
When the heated towel rail is set at the two-hour mode the screen will show this image:
Once the towel rail is set at the two-hour mode and until the two hours have finished or the
key is pressed again, the display will show this image:
1.8. “Open window” function
This function is activated when the probe detects a reduction of 4º in respect of the set
temperature during 30 minutes.
On activation the following image will appear on the towel rail display for 5 seconds:
When the “Open window” function is activated, the following screen will appear showing that
the anti-frost mode is activated:
This function will be active for 2 hours. If the button
is pushed during this period the towel
rail will switch off. Pushing the button
again will switch on the towel rail without the “Open
window” function being switched on.
1.9. Screen brightness function
You can change the brightness of the screen by pushing the button
for 3 seconds when the
product is in manual mode. Entering this mode you will see the following screen:
In ON mode you can increase or decrease the brightness of the screen by using the
and
buttons.