13
9. USER INSTRUCTIONS
9.1.
Your RD Series unvented hot water cylinder has been designed to give many years of trouble
free service.
9.2.
When a hot tap is turned on there may be a short surge of water, this is quite normal with
unvented systems and does not mean there is a fault.
9.3.
When you first fill a basin the water may sometimes appear milky. This is due to very tiny air
bubbles in the water which will clear very quickly.
9.4.
If water is seen dripping through the tundish at any time switch off the electricity supply
immediately and call the installer or the Rointe customer service department on the number
listed at the end of this guide.
9.5 Front panel description
The following image shows how the front panel of the water heater looks.
9.5.1 Front panel indicators
SECTION
DESCRIPTION
Set temperature indicator
Amount of hot water available
ON / STAND BY indicator
Heater element in use indicator
Programme indicator
9.5.2 Front panel touchpad
SECTION
DESCRIPTION
Increase set temperature button
Decrease set temperature button
ON / STAND BY button
