EN
PALAOS
VERTICAL DIGITAL RADIATOR
19
5.5. AUTOMATIC MODES
In Automatic mode, the product regulates the temperature according to the daily programme
created by the user, using the temperatures previously set in the Comfort and Night modes.
To switch from ANTI-FROST mode to PROGRAMMING mode, press the
MODE button again.
The word “PRO” will appear on the screen with an arrow pointing to the clock
symbol (located at the bottom right of the screen). In the “clock” section of
the screen, the current time of day is displayed, only if the time and day of the
week have been set correctly when the product is first switched on.
The programming schedule is displayed on the left side of the screen by a
succession of lines that representing 24 hours of the day. An arrow at the top
of the screen indicates the operating mode (Comfort or Night).
The temperature selected for that mode is shown on the display.
To modify the temperatures of the Comfort or Night modes, access the
corresponding mode and then use the
INCREASE and
DECREASE
buttons to modify the temperature parameters.
5.5.1. WEEKLY PROGRAMMING MODES
In order to proceed to the weekly programming, you must:
Have established the correct time and day of the week.
Be in PROGRAMMING mode (press the MODE button for 5 seconds until “PRO” appears
on the screen. “FP” will appear first, then “PRO”.)
