16
•
USER mode
To enter the USER function, ensure the
icon is highlighted in the `Program´
sub-menu and press the
button to access.
A 4-digit PIN code is required in order to access the menu. The default PIN
is 0000.
To enter the PIN use the
and
and
and
buttons to move left,
right, up or down to select the correct numbers, pressing
after each
number is highlighted to confirm. Once the full 4 digits have been entered,
move to OK on the display panel and press the
button to confirm. Once
the PIN number has been entered correctly, the main USER function sub-menu
will be shown.
The below icons displayed on the screen take you to the following functions:
ENABLE /
DISABLE
functions
Change PIN
Upper
temperature limit
Lower
temperature
limit
•
Enable / Disable functions
To access the Enable/Disable function, ensure the
icon is highlighted in
the `Program´ sub-menu and press the
button to access.
Use the
and
buttons to move up and down respectively to select ON
to enable or OFF to disable. Once the desired option is highlighted press the
button to confirm. Use the
button to go back to the main display
panel or leave for 30 seconds without pressing any buttons.
On the main screen you will see the icon in AUTOMATIC function, the
icon in MANUAL function and
when in PILOT WIRE function.