Rointe K series, Instruction Manual, Page: 16 / 52

1.5. Temperature selection
By pressing or we change the temperature. When the room temperature is lower
than the one set, the radiator comes on, the symbol appearing.
SYMBOL MODE
30º C
19,5º C
TEMPERATURE RANGE
20º C
15º C
8º C
COMFORT
ECO
ANTI-FROST
1.6. Manual/Automatic mode
By pressing we change between the Manual and Automatic mode.
When the manual mode is selected, the symbol appears on the display. When the
automatic mode is selected, the symbol appears on the display.
1.6.1. Manual Mode
This enables to choose between the modes of operation COMFORT, ECO and ANTI-FROST,
changing the temperature as indicated in Section 1.5.
1.6.2. Automatic mode
This mode activates the programming set on the radiator.
1.7 Menu / Programming function
By repeatedly pressing we can see the programming that is saved in the radiator for
each day. Pressing only once shows day one, twice shows day two and so on.
Pressing for 3 seconds allows you to program the radiator directly:
1. Select the CONFORT temperature setting (20ºC to 30ºC), using and . The symbol
and the temperature will flash.
2. Press and we can select using and the ECO temperature (15ºC to 19.5ºC).
The symbol and the temperature will flash.
3. After pressing the button once again, the numbers of the week will start flashing and
show as SEL1, SEL2, SEL3…. We can go forwards and backwards using the button
and . Press to select the day that we wish to program.
4. Pressing , takes us to the hour we wish to program. To change the hours use the
and buttons. The hours selected will show as (00H, 01H, 02H,…). By pressing
the button, we can select hour by hour the mode required: CONFORT, ECO or OFF.
5. To finish the programming press or leave it for 30 seconds without pressing any
buttons.
16