
9
ELBA
PRO
EN
For any product, if the power cable is damaged, it must be replaced by a specific cable. The replacement
of the cable must be done by the maker, its after-sales service or qualified personnel. The technical
specifications of your product appear on the technical data label.
OK
IMPORTANT - This product must never be installed with its control
panel at the top. This product must not be installed horizontally. During
installation, use wedges so that the control panel will not be in contact
with the floor.
2.3. Specific Regulations for Bathrooms
This product can be safety installed in Zones 3. For installations in Zones 2 (check the scheme below),
please consider the following limitations:
• In bathrooms, the product must never be installed in such a way that the control panel may be touched
by someone in the bathtub or having a shower. The control panel should be located at least 600 mm
distance from any wet areas. The body of the product can be placed in Zones 2 if the control panel is
located inside Zone 3.
• In a kitchen or bathroom, the body of the product must be placed at least 25 cm from the floor.
• Is mandatory to connect the product to an earthed electrical outlet.
Summary of Contents for Elba PRO 400
