12
The product must not be placed in front of or directly below a fixed socket. The lower part
must be at least 15 cm above the floor.
An installation kit is included in the packaging. Follow the instructions below:
1. Select the right place on the wall.
2. Place the product to establish and mark the place where the brackets will be placed.
3. Drill the holes in the previously marked locations.
4. Insert the plugs in the holes made.
5. Screw the plastic anchoring piece to the wall with screw no. 3 with Ø 5.5 x 50 mm.
6. Screw the two towel rail fastening pieces and the plastic fastening piece to the
horizontal tube of the towel rail as shown in the picture with screw no. 6 with Ø 6 x 35
mm.
7. Insert the assembly into the plastic anchoring piece. Fasten with grub screw no. 8 with
Ø 2.9 x 9.5 mm.
8. Place the trim on the support piece.
Nº.
ITEM
1
Rawl Plug Ø10 x 45 mm
2
Fixed plastic bracket
3
Screw Ø 5.5 x 50 mm
4
Plastic bracket with nut M6
5
Plastic head support
6
Screw Ø 6 x 35 mm
7
Plastic cover support
8
Locking screw Ø 2.9 x 9.5 mm
9
Product
4. MAINTENANCE AND CLEANING
The product does not require any maintenance. We recommend cleaning the product (back,
bottom of the product, etc.). Do not use abrasive substances on the product, clean it with
a damp cloth and neutral pH soap and the screen with a dry cloth. Before carrying out any
cleaning operation, make sure that the product is switched off and at room temperature.
Summary of Contents for ELBA AQUA WIDTH 400
Page 2: ...2 ...
