EN
SYGMA
ELECTRIC TOWEL RAIL
13
on the keypad. To cancel the two hour boost mode, press the
button again.
5.7. MANUAL/AUTOMATIC FUNCTIONS
Press the
button to toggle between Manual and Automatic functions. The symbol for the
AUTOMATIC function and the symbol for the manual will appear on the main display.
MANUAL
AUTOMATIC
This function allows you to change the product
between the COMFORT, ECO and ANTI-FROST
modes and to change the temperature.
This function will activate the programming that
has previously been set in the product.
5.7.1. MANUAL FUNCTION
This function allows you to vary the temperature by switching the product modes between
COMFORT, ECO and anti-freeze. The icons for COMFORT, ECO and ANTI-FROST will appear
when the temperature changes to the above ranges. Depending on the selected temperature
you will see one of these symbols on the display:
COMFORT
ECO
ANTI-FROST
From 19ºC to 30ºC
From 7.5ºC to 18.5ºC
7ºC
5.7.2. AUTOMATIC FUNCTION
To start programming, check that it is in the Automatic function, with the display showing
the symbol . If the display shows the symbol press
to change function. Once in
Automatic function, press and hold
for 3 seconds to enter in programming mode.
STEP 1- Select the COMFORT mode temperature.
The CONFORT mode
will be programmed first. Select the COMFORT mode temperature
between 19ºC and 30ºC with the
and
buttons. The icon and temperature will
flash; press the
icon to confirm.
