background image

13

8.8.  This guarantee does not affect the buyer’s legal rights stipulated in the current national legislation, nor affects 
those rights against the distributor or installer that could come forth in compliance with the purchase contract. 

8.9.  In the absence of a national legal legislation applicable, this guarantee shall prevail and may be construed 
as the buyer’s only protection. ROINTE, its offices, distributors and installers may not be held responsible for 
any accidental damage that emerges due to infringement of any rules implicitly related to this product. 

9. EUROPEAN DIRECTIVE (WEEE) 2012/19/UE

Under the European Directive 2012/19/UE on Waste Electrical and Electronic Equipment (WEEE), the product 
cannot be disposed in the usual council bins and containers. They must be separated to optimize the recovery 
and recycling of all of the components and materials and reducing the impact to human health and the 
environment. The symbol of the container crossed out over a horizontal line is marked on all of ROINTE 
products to remind the consumer of the obligation to separate them on disposal. The consumer should 
contact the local authority or original point of sale to learn more about the correct disposal of this product.

10. DIMENSIONS & TECHNICAL CHARACTERISTICS

TECHNICAL INFORMATION

Compact size

Water temperature stabilisation

Overheating protection

Non pressurised installation

Nominal pressure

6 bar

Protection Grade

IP24

Energy classification

A

FUNCTIONS

Illuminated pilot light

INSTALLATION

Installation position

360º

SAFETY

Safety thermostat

REGULATIONS & GUARANTEES

2004/108/CE Electromagnetic comp.

2006/95/CE Low voltage directive

Guarantee

2 years

MODELS

CWI700DHWU4

CWI800DHWU4

CWI350DHWK4

Output volume (L/Min)

4

4.6

2

Load profile

XS

XS

XXS

Nominal power (W)

7,000

8,000

3,500

Annual electricity consumption (kWh)

467

468

478

Recommended use

Universal

Universal

Kitchen

DIMENSIONS

Width x height x depth (mm)

130 x 200 x 76

130 x 200 x 76

130 x 200 x 76

Depth from connections to the wall (mm)

28

28

28

Distance between connections (mm)

70

70

70

CHARACTERISTICS

Water connections (inches)

1/2”

1/2”

10 mm

Finishes

White RAL 9016

INSTALLATION

Installation

Pressurised

Pressurised

Non-pressurised

EAN CODE

8436045914583

8436045914590

8436045913647

Summary of Contents for Capri CWI350DHWK4





















Reviews: