Roidmi XCQXZDS03 Series User Manual Download Page 4

3

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference;
(2) This device must accept any interference received, including interference that may cause undesired operation;
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s 
authority to operate the equipment;
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 
a residential installation;
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation;
If this equipment does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on;
The user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna;
(2) Increase the separation between the equipment and receiver;
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
(4) Consult the dealer or an experienced radio/TV technician for help.

FCC STATEMENT

FCC Radiation Exposure Statement 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment;

This equipment is a handheld device.

10. Do not drop the product. Do not place the product under any mechanical stress. Prevent the product from 
colliding with other objects;
11. Timely clean the dust cup to guarantee good air ventilation, so as to avoid poor suction or motor heating 
caused by air blockage;
12. Protect the vacuum cleaner from extreme temperatures. Recommended operating and storage temperatures 
are 32°F (0°C) to 95°F (35°C). Keep it in a cool and dry place;
13. Do not use vacuum cleaner to suck up water to avoid water entering the main unit and causing malfunction. 
When water enters the dust cup, turn off the vacuum cleaner immediately and empty the dust cup. Make sure the 
dust cup is completely dry;
14. Dry after washing the brush roller completely before reinstalling;
15. Timely clean attachments after use to prevent food residue, cotton wool from rotting in them;
16. Use only the cleaning brush supplied by the manufacturer to clean the dust cup filter. Do not use other steel 
or hard brushes;

17. Keep the cleaning brush out of the reach of children to avoid injury. With a sharp blade, the cleaning brush is 

used to cut off entangled substances that are difficult to clean;
18. It is recommended to empty the water tank after using the dual rotating electric mop brushes to prevent water 
seeping and damaging the floor;
19. Do not expose the dual rotating electric mop brushes to the sun or store it at temperature below 0 °C, otherwise 
it may cause product damage;
20. Do not use the product to clean the same spot for a long time, otherwise it may damage the main unit;
21. Do not step on the vacuum head of the dual rotating electric mop brushes, otherwise it may cause product damage;
22. This product is not intended to use on carpets, otherwise it may damage the product or the carpets;
23. Two mop pads must be installed at the same time when using the dual rotating electric mop brushes, otherwise 
it may damage the floor. 

Summary of Contents for XCQXZDS03 Series












Reviews: