2.Intercom with other apartments
3.Intercom within the same house
NOTICE
4.Call transfer
5.Call indoor monitor
Notice
In picture 2-12, enter 0 # to call all
other indoor monitor. Enter 1 # to
call main indoor monitor. Enter 2 #
to call slave indoor monitor, and so
on. The maximum indoor monitor
is 10 in one apartment.
In the same network, users can call each other with the indoor
monitors.
In picture 2-12, enter the building number,unit number, floor
number and room number of the receiver' s indoor monitor.
Press # to confirm and start to call. For example,
enter 0001020303 to call building 1, unit 2, floor 3 and room
3. Press # to confirm and start calling.
If both indoor monitors are in the same unit, enter floor
room # to call directly. For example,
enter 1002 to call floor 10,room 2. Press # to confirm
and start calling.
When there are more than one indoor
monitor within the same apartment,
if outdoor station calls, one of the
indoor monitor picks up the call
and decides to transfer the call
to other indoor monitors, press
the to call the rest of the
indoor monitors.
When user calls all the indoor monitors, all indoor
monitors ring in the same time. When one of the
indoor monitor picks up the call, the rest of the indoor
monitors will hang up automatically.
When indoor monitor is called by other equipments, indoor
monitor rings and pops up intercom picture. Press to pick
up the call. Press or to end the call. (Notice: The
maximum talk time between indoor monitor and outdoor
station/guard station is 2 minutes. After 2 minutes, the system
will hang up the call automatically).
-39-
-40-
