6
ROHO Hybrid Elite Cushion Operation Manual
Cover Removal and Replacement
Cover Removal:
1. Unzip the cover.
2. Remove the cover from the cushion.
Cover Replacement:
1. Unzip the cover.
2. Insert the cushion into the cover, front edge first. The air cells should face up and the
non-skid surface of the cover should face down.
3. Reach inside the cover and push the inflation valve(s) through the valve opening(s) in
the cover.
4. Zip the cover.
5. If the hook fastener strips were removed prior to washing, replace the strips.
Cushion Insert Removal and Replacement
Cushion Insert Removal:
1. Unzip the cover.
2. Slide the inflation tube out through the hole in the foam base corner. For a two-valve
cushion, repeat for the other side.
3. Remove the air insert from the contoured foam base.
Cushion Insert Replacement:
1. Line up the hook and loop fastener strips and refer to the directional labels to
correctly place the air insert onto the foam base. Press to attach securely.
2. Insert the inflation tube through the hole in the foam base corner. For a two-valve
cushion, repeat for the other side.
3. Press the inflation tube(s) into the groove(s) in the foam base. The inflation valve(s)
should face the front of the cushion.
Inspect the cover for damage and replace if necessary.
Inspect the foam portion of the product for damage and replace if necessary.
