2
Plug your device to a grounded socket. To prevent harming your appliance
do not use extension cords that supply insufficient current. When using
extension cords, make sure to use grounded socket, with the cable cross
section of 0.75m
㎡
.
Do not place the appliance over or near direct heat sources such as a
stove, heating oven, etc.
Ensure that the appliance is placed on a firm and flat surface. Do not put it
on the edge of a table or bench. The least blow or knock may overturn it.
Do not forget that it may be full of hot water.
Do not let cord hang over edge of table or counter or touch any other
appliances.
Avoid actions that may harm or damage the cord or plug of your device .Do
not carry your appliance by holding from the cord. To unplug the appliance,
hold the plug and NEVER pull by the cord.
Never interfere with your appliance except for the purposes of cleaning
and maintenance. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions or has been damaged in any
manner. Such as by dropping down, etc. Do not attempt to repair it by
yourself. It must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Always hold your appliance by its handle. Its outer surface may be hot.
Unplug from outlet when not in use and before cleaning. Allow it to cool
down completely before cleaning the appliance.
Use your appliance with its own power base unit only. Do not place on it
those units belonging to any other appliance.
You can use the product as a kettle. In this case, when the water begins to
boil switch off your appliance by pressing on/off switch since your unit
would not be switched off automatically.
If you want to re-boil your water, wait for about 15-20 seconds before
switching on your appliance.
Put sufficient quantity of cold water into your electric pot, according to the
needed number of cup of boil water (for 3-4 persons, max).
