Before using the fan make sure that it is on a flat and stable surface.
Damage may occur if it is placed on an incline or decline.
Set all the switches to OFF position, then insert the plug directly into a standard AC
socket-outlet. Be sure plug fits tightly into outlet.
ON / Stand-By Button:
Press the ON button to start the unit. The unit will beep once and start to operate in at Low
speedsetting at the default speed of 18 in Normal Mode.
Again upon pressing this button the unit will be turned off and will remain in stand- by.
SWING Button:
Press the swing button and the fan head will oscillate horizontally through approximately
90˚angle in both the directions (Left-Right). .
Timer Button:
Turn the timer dial Press the timer button repeatedly to obtain the desired operating time.
(1 hour to 24 hours). Each time the button is pressed the time interval is incremented
upwards by 1hrs. The display panel will indicate timer value.
Timer ON Feature:
Select the time after which you want to operate the fan after the selected time is elapsed
the fan the unit will operate in normal mode at the speed of 8.
While the unit is in standby mode press the timer button once and the display will show up
the selected time in hours. Press the same timer button to select the desired time after
which you want the fan to start, the time can be selected from 1 to 18hrs. The fan will start
to operate once the selected time is elapsed.
Timer OFF Feature:
While the fan is operating press the timer button and the timer OFF indicator will illuminate
and the display will show up the selected time in hours.
Press the timer button to select the desired time after which you want the fan to stop, the
time can be selected from 1 to 24hrs. Once the selected time is reached the fan will turn
itself off and will remain in standby mode
Mode Button:
Press the mode button repeatedly to select the desired mode of operation. The fan can be
set to run in three different modes of operation: Normal,
Natural and Sleep
. The icon corresponding to selected mode will appear on the display
panel.