ASSEMBLING THE FAN
1.
Take off all the appliance parts out of the packaging and remove all
packaging materials and inserts.
2.
Take the main body (13), put it into the base (14), and fixed by base fixed
screw (15)
3.
Take the back grill (5), put it on the motor (6), and fixed by grill lock nut (4)
4.
Take the blade (3), put it into the motor (6), and fixed by blade lock nut (2)
5. Take the front grill (1), put it to match the back grill (5). And fixed by fixed
screw (11) and fixed nut (10)
On / Off and Speed Control
The ON/OFF and Speed is controlled by the buttons in the main body.
0-
The Fan is switched Off
1-
The Fan operates at the Low speed
2-
The Fan operates at the middle speed
3-
The Fan operates at the high speed
Oscillation Adjustment
Push the oscillation control to turn on the oscillation function, pull the oscillation
control to turn it off. (Fig.7)
(Fig.7)
Cleaning
Before cleaning the appliance always disconnect the power plug from
the receptacle.
•
The appliance, the power cord and the power plug should not be
immersed in water or other liquids when you are cleaning them. Clean
them with a dry cloth.
•
If it is very dirty, the outside of the appliance can be wiped carefully
with a moist cloth and then dried carefully. Make sure that no moisture
penetrates the interior of the appliance.
