ASSEMBLY
Insert the upper stand tube
(11) to the bottom of the engine unit and tighten
the upper stand tube by turning it anticlockwise.
• Then insert the lower stand tube (12) to the upper stand tube (11) and
tighten the lower stand tube
(12) by turning it anticlockwise.
• Finally insert the lower stand tube (12) to the hole on the base (13) and
tighten the lower stand tube
(12) by turning it clockwise.
Fix the rear guard
• Remove the blade assembly nut (2) and the rear-guard nut (4) from the
engine shaft (6).
• Position the rear guard onto (5) the engine shaft (6) while ensuring that the
mark “I” on the rear guard is up.
• Then re-position the rear guard nut onto the engine shaft, and tighten it to
secure the rear guard
(5).
Fix the blade assembly
• Slide the blade assembly onto (3) the engine shaft (6) and make sure the
engine shaft is fully seated into the groove of the blade assembly.
• Then tighten the blade assembly (6) by fastening the blade assembly nut (2).
