Flat Use
R-8070
2500W
1900W
INSTALLATION INSTRUCTION
Please install the upright post before use. See the following figure.
Back Handle
1
、
Remove 2 columns and 2 screws from
packaging accessories
2
、
The slot of the 2 columns is aligned to the slot
and screw hole above the handle.
3
、
Fix two columns on the back cover with two
screws respectively.
Usage:
1. Please check before you use:
A: The heating element and electric wire cannot be broken.
B: Please do not use the socket lower than 10A for fear of any accident.
2. Use the fan heater on the flat place to avoid being toppled.
3. Turn on the power switch first
，
“
O
”
= ON
，“—”
OFF
；
R-8070
1
、
Turn on the power switch, LED display environment
temperature after all functional indicators flicker for
a short time. See picture 1.1-1.2
2
、
Press “
” ON(only Fan working). See picture 2.1
3
、
Press “
” again, low heat. See picture 3.1
4
、
Press “
” third time, high heat. See picture 4.1
5
、
Press “
” fourth time, high heat+swing. See picture 5.1
6
、
Press
“
” fifth time, OFF(Fan keep working for 60 seconds
when shutdown the appliance after heating) See picture 6.1
1.1
1.2
2.1
3.1
4.1
