⑩
Charging socket
⑪
Adaptor
⑫
Washable sign
⑬
Cleaning brush
Using your shaver (see fig.2)
1. Remove the protective cap.
2. Press the switch to turn the shaver on.
3. Move the shaver quickly over your skin and against the growing direction of beard.
Make both straight and circular movements.
4.Press the switch to turn the shaver off.
5. Put the protective cap on the shaver every time you have used to prevent damage
of shaving cap. Slide the trimmer knob up to open the trimmer, Place the trimmer at
a right angle (
90°)
to your skin and move it downward to trim sideburns.
Cleaning and maintenance (see fig. 3,4,5,6)
1.
For the purpose of good cleanness to the saver. It
’
s recommended that you clean your shaver
with water and regular cleaning will keep your shaver in good condition while preventing
odors or bacteria from developing and maintain the cutting performance.
2.
Switch off the shaver.
3.
Push the foil release button and remove the foil frame. Turn the inner rack switch
anticlockwise and remove out the inner cutter.
4.
Clean the guard, foil frame, hair chamber and the shaver body with the long side of brush.
Clean the inner cutter with the short side of brush.
5.
Reassemble the shaver parts in the reverse order.
The cutting system maintenance (see fig.4,5)
It is recommended to clean the device and especially the inner parts of the shaving
head regularly in order to maintain your shavers cutting performance.
1. Press down foil-frame release button and open the bracket.
2. Take apart floating system from the bracket via release knob of floating systems
fig.4. Rotate cap-fixing frame to certain locating as fig5 than take shaving cap and
shaving head outside.
3. Reassemble the shaver parts in the reverse order.
Charge (see fig.7)
Charge about two hours, after full charge the red light turns green light shows.
Recycling the battery (see fig.8)
Batteries contain substances that may pollute the environment. The battery in this
Warning-To prevent electric shock or personal injury, disconnect the
power cord from the shaver and turn off the shaver before cleaning.
