Rohm RPR-0521RS-EVK-001, Manual

Page: 1 / 3

1/2
© 2017 ROHM Co., Ltd.
No. 60UG059E Rev.001
E Rev.001
JAN.2018
User’s Guide
Proximity Sensor/Ambient Light Sensor
RPR-0521RS-EVK-001 Manual
RPR-0521RS-EVK-001 is an evaluation board for RPR-0521RS, which is a ROHM PS/ALS. This User’s Guide is about how to use RPR-0521RS
-EVK-001 together with SensorShield*
1
. *1 SensorShield is sold as Shield-EVK-001.
Preparation
 Arduino Uno 1pc
 Personal Computer installed Arduino IDE 1pc
 Requirement : Arduino 1.6.7 or higher
 Please use Arduino IDE which can be
downloaded from the link below:
http://www.arduino.cc/
 USB cable for connecting Arduino and PC 1pc
 SensorShield 1pc
 RPR-0521RS-EVK-001 1pc
Setting
1.
Connect the Arduino and the SensorShield (Figure 1)
Figure 1. Connection between the Arduino and the
SensorShield
2.
Connect RPR-0521RS-EVK-001 to the socket of I2C area
on the SensorShield (Figure 2)
3.
Set Voltage of the SensorShield to 3.0V (Figure 2)
Figure 2. Connection between RPR-0521RS-EVK-001
and the SensorShield
4.
Connect the Arduino to the PC using a USB cable
5.
Download RPR-0521RS.zip from the link below
http://www.rohm.com/web/global/sensor-shield-support
6.
Launch Arduino IDE
7.
Select [Sketch]->[Include Library]->[Add.ZIP library...],
install RPR-0521RS.zip
8.
Select [File]->[Examples]->[RPR-0521RS]->[example]->
[RPR-0521RS]
USB connecter
SensorShield