Rohm RKX-EVK-001, User Manual

Page: 35 / 56

35/55
© 2022 ROHM Co., Ltd. No. 64UG118E Rev.002
Feb.2022
User’s Guide
WUFS and BTS bits values will be changing for a brief period when the corresponding interrupt has fired and stay on until they are auto cleared
through INT_REL register auto read ( Figure 61 ).
NOTE: Streaming and logging are automatically paused when register polling is started.
Figure 61. Wake-Up / Back-to-Sleep Interrupt Detection Register Set
1.4.3.4
Stream modify mode
When the Register editor tab is selected while Streaming is enabled, the register editor will enter into a data stream modify mode as indicated by
the name of the Registers tab (e.g., KX132-1211 – MODIFYING STREAM ) ( Figure 62) . This mode offers the user a way to change the registers
which will have an effect on the data stream itself. When the desired register changes have been made and the user has switched back to the
Plotter tab, Streaming continues with the modified register values. This makes it easy to change the ODR or data range for example.
Figure 62. Register editor view in the Stream Modify Mode