22/55
© 2022 ROHM Co., Ltd.
No. 64UG118E Rev.002
Feb.2022
User’s Guide
1.4.1.1
Raw data
When raw data is disabled, data is shown in SI units:
Figure 36. Data stream in SI units
NOTE
: If the full-scale range of the device has been modified in the Stream modify mode (
), e.g., g-range of the
accelerometer, then the SI unit values displayed in the plotter view and in the Digital Output view channel will be incorrect.
For ADC streaming, “inverted” settings are available only when raw data is disabled.
Figure 37. ADC data in SI units (V)
1.4.1.2
Zooming
You can zoom in and out using the mouse scroll button or the right mouse CTRL.
NOTE
: When you perform zooming, while “Auto scaling” is enabled, the Plotter will terminate auto scaling.
In order to use Auto scaling after zooming, the “Auto scaling” - button must be activated again.
1.4.1.3
Moving
The position of the Data axis (y-axis) can be moved up and down using the right mouse button.
