MK715x1EK1A Hardware Manual
2. Hardware specifications
FEXK715x1EK1A_HardManual-01
6
2.2.3
DIP-SW
4-bit DIP-SW connected to GPIO is available. Each bit is pulled up to VDDIO. GPIO and DIP-SW can be
completely separated by cutting the solder bridge(SB_P22, SB_P23, SB_P26, SB_P27). The circuit configuration,
port assignment for each bit, and initial settings are shown below.
Fig. 2-5 : DIP-SW
Symbol
Pin No.
GPIO Port
Initial setting
SW1
1
P0.22
On
2
P0.23
Off
3
P0.26
Off
4
P0.27
Off
Table. 2-2 : port assignment for each bit, and initial settings
