About this Operating Manual | 1
KZS-H_KZS-HG
7 / 44
This also includes damage caused
▪ if the operator or third parties carry out modifications or repairs to the ser-
vices / products without prior permission of the manufacturer. Excepted
from this are damage or defects which have occurred which were demon-
strably not due to these modifications or repairs.
▪ which occur due to use of the centric clamp under altered operating condi-
tions (e.g. materials, tools, cutting parameters, programs etc.), in particu-
lar without consulting and obtaining written authorisation from the seller or
manufacturer.
▪ which are due to altered environmental conditions.
1.4
Conventions of Presentation
1.4.1
Text Display
To improve legibility and comprehension of the text, the following conventions
were agreed:
Text type
Marking
Function
Operating instruction
1.
2., etc.
Marks a sequence of actions
Marks an individual operating instruction
Ø
Marks an intermediate result of an
operating instruction
ü
End result of an operating instruction
List
▪
Marks elements of a list
Marks comments within a list
Contains useful information or further information.
Summary of Contents for KZS-H
Page 2: ......
