3 | Product Description
20 / 52
Power Chuck DURO-A
3.2.2
Environmental and Operational Conditions
The power chuck is designed for the following environmental and operating
conditions:
Ambient medium
Air, non-corrosive/non-aggressive
fluids and gases
Place of use
Interior
Vibration speeds
< 5 mm/s as per DIN ISO 10816-3
Relative humidity (at +40 °C)
< 100%
Use in very humid conditions leads to
faster corrosion and may shorten the
useful life
Potentially explosive environments
No
Ambient temperature at place of op-
eration
+5 °C to +60 °C
Ambient temperature for storage
+5 °C to +60 °C
Dry and wet machining
Wet machining permitted with cooling
lubricants
Service life
500,000 clamping cycles
Pollution of the machine’s surroundings caused by the machine itself is per-
mitted. However, perfect operation of the power chuck must be ensured and
checked regularly. With each jaw and tool change, the power chuck must be
cleaned of coarse dirt with a broom or brush. Cleaning with compressed air
is not permitted.
Summary of Contents for DURO-A
Page 2: ......
