11/35
User
’
s Guide
© 2022 ROHM Co., Ltd.
No. 65UG013E Rev.001
July 2022
Figure 2: Executable file
3.3.
PC Connection
Communication between GUI software and EVK hardware is achieved by inserting a micro-USB cable
into the CY8CKIT-059 plug-in board that is mounted on the MB (see Figure 1 and Figure 4).
Once the communication between GUI and CY8CKIT-059 plug-in board
is established, the “EVK
connection” box of the GUI software will turn to yellow. The initialization steps are also shown in the “Log” tab
at the bottom (see figure below).
Figure 3: EVK connection confirmation
4. MB DESCRIPTION
The Mother board can be used with a variety of different DBs that are developed for different ROHM ICs.
It acts as an interface between the DBs, PC and external equipment.
Functional blocks of the board are shown below:
Summary of Contents for BD868 0MUF-C Series
