Rohl Perrin & Rowe U.KIT1625L Manual Download Page 4

www.rohlhome.com

Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.

INSTALLATION INSTRUCTIONS

Congratulations on the purchase of your Perrin and Rowe/Triflow filtration Product. Correctly installed and with

sensible care, this product will give you many years of trouble free service.

The Perrin and Rowe Collection

Filter Installation Guide

CARE & MAINTENANCE

Wipe down after use to avoid water spotting and mineral build up.

2

4

1

3

7

6

Turn on the main supply valve.

Run the filtered water for 2 minutes to

flush the system, and carefully check 

the system for leaks. The system is

now ready for use.

For optimum filter performance when 

using the U.1802 filter cartridge use 

the stop valve to set a water flow of 

0.4gpm to 0.5gpm max.

Preparation for Installer

Ensure you have the correct fittings to connect

to the filter faucet

IMPORTANT INFORMATION

These are instructions for Triflow filters and the optional add on pre-filter version of the model

you are installing. Please read carefully to ensure correct installation.

Before you proceed... We recommend you engage the services of a registered plumber

to install this product.

In addition to the guide below it is essential that the written information overleaf is

carefully read and understood.

Flush the plumbing system before

installing the Kitchen product.

ø3/8"

Main Cold Feed

Flow Direction

Base of 

cabinet

Allow room 

around the

housing

Filter

U.1812

Main cold 

feed

To Filter 

Tap

5

To Filtered 

Tap

Filter

U.1812

Flow direction

Supplied 

hose

1

 "

M

in

im

um

ø1/4" to ø1/4" Connector

ø1/4" to ø3/8" 

Connector

ø1/4" Connector

Flow direction

Flow direction

Filter 

Connection

Kit

Shut off mains supply. A stop valve was 

supplied with the system for this purpose, 

and will be located on the adjacent pipe work.
If you plan to be away from home for extended 

periods, carry out the procedures above, to prevent 

the risk of freezing. Freezing will invalidate the 

warranty. 

Turn the filtered lever on the faucet to the 

on position. This will confirm the water supply 

is off, and release the pressure in the system.

To Winterize the Unit

8

Pre-filter Installation

Pre Filter

U.1816

Filter

U.1812

Remember to 

leave room for 

servicing the 

cartridge on 

both housings.

Flow direction

8

Recommended  "

To Filter 

Tap

From Stop

Valve

Install

Pre-filter

here.

(Follow

steps 7 to 8)

INSTALL

PRE-FILTER

HERE.

(Follow steps

7 to 8)

To Stop 

Valve

To Filtered 

Tap

Pre Filter

U.1816

Filter

U.1812

Flow direction

Supplied 

hose

Flow direction

Position the filter housing

leaving room around it

for future access and

cartridge replacement.

Mark the screw holes

ready for pilot holes.

Leave room for the

Pre-filter housing if

necessary.

Remember to

leave room

for servicing 

the cartridge 

on both 

housings.

Drill the pilot holes

and screw the filter

housing bracket in

position. Making

sure to keep as

level as possible.

Check the hose

length for distance

Install the supplied

stop valve in an easily

accessible area to allow

access to turn off the

water supply in the

future, for servicing

and cartridge

replacement.

Tighten the hoses from

the stop valve to the

housings following the

flow of the water

shown on the cap.

If installing a Pre-filter

the system flows from

the stop valve to the

Pre-filter and on to the

filter housing and then

up to the filter tap.

With the supplied connector kit

connect the hose from the

filter housing to the filter tap

using one of the connectors.

Check the

hose length

for distance.

If installing a Pre-filter follow steps 1-3 for the

second bracket taking into account the hose

length supplied from the Pre-filter to the filter.

Tighten the hoses from the stop valve to the

housings following the flow of the water shown on

the cap. When installing the Pre-filter the system

flows from the stop valve to the Pre-filter and on to

the filter housing and then up to the filter tap.

IMPORTANT NOTES

Do not use with water, that is microbiologically unsafe or of unknown quality without adequate disinfection

before or after the system. Systems certified for cyst reductions may be used on disinfected waters that may

contain filterable cysts.

Please ensure that the installation complies with applicable State & local plumbing codes.

System is to be supplied with cold water only.

3 Parker

Irvine, CA  92618

800-777-9762

www.rohlhome.com

Reviews: