Rohde & Schwarz ZVAX24 Service Manual Download Page 86

Page: 86 / 145

Board Replacement

R&S ZVAX24

1312.7979.82 3.12

E-1

Replacing LED Board A80

, A81, A82

(See Chapter 5, Spare Parts List, Item 470, and drawing 1311.2509.01)

The LED boards are installed behind the front panel.

Removing the LED board

Turn off the instrument and disconnect from the mains, screw off the 4 rear-panel feet (580) and pull
off the enclosure (570) backwards.

Remove the front cover (540), see

Replacing the Front Cover

Disconnect cable W80.

Remove the 2 screws (480) and take out the LED board.

Fitting the new LED board

Reinstall the LED board by reversing the removal procedure.

Push the enclosure (570) back on and screw the 4 rear-panel feet (580) into position.

Connect the mains cable, turn on at the mains switch and press the ON key.

Connect the R&S ZVAX with the R&S ZVA and switch on the installed options.

Check the corresponding LEDs.

Summary of Contents for ZVAX24


















































































































































Search results

Summary of Contents for ZVAX24

Reviews:

Brands by name

Popular brands

Rohde & Schwarz ZVAX24, Service Manual

Search results

Summary of Contents for ZVAX24

Reviews:

Brands by name

Popular brands