Rohde & Schwarz ZNL Series, User Manual

Page: 72 / 240

Analysis
R&S
®
ZNL
72 User Manual 1178.5989.02 ─ 06
Remote command:
FORMat:DEXPort:DSEParator
on page 211
6.4 Marker Usage
Access : "Overview" > "Analysis"
The following marker settings and functions are available in the I/Q Analyzer applica-
tion.
For "I/Q-Vector" displays markers are not available.
In the I/Q Analyzer application, the resolution with which the frequency can be mea-
sured with a marker is always the filter bandwidth, which is derived from the defined
sample rate (see
Chapter 4.1.1, "Sample Rate and Maximum Usable I/Q Bandwidth for
RF Input" , on page 18).
● Marker Settings .......................................................................................................72
● Marker Search Settings and Positioning Functions ................................................ 77
● Marker Search Settings for Spectrograms ..............................................................85
● Marker Functions .................................................................................................... 88
6.4.1 Marker Settings
Or : [MKR] > "MarkerConfig"
The remote commands required to define these settings are described in Chap-
ter 9.7.3.1, "Setting Up Individual Markers" , on page 170.
● Individual Marker Setup .......................................................................................... 72
● General Marker Settings ......................................................................................... 76
6.4.1.1 Individual Marker Setup
Up to 17 markers or delta markers can be activated for each window simultaneously.
Initial marker setup is performed using the "Marker" dialog box.
Marker Usage