manualshive.com logo in svg

Rohde & Schwarz ZNL Series, User Manual

Share
Download
Rohde & Schwarz ZNL Series User Manual Download Page 70

Analysis

R&S

®

ZNL

70

User Manual 1178.5989.02 ─ 06

Export all Traces and all Table Results 

........................................................................ 70

Include Instrument & Measurement Settings 

............................................................... 70

Trace to Export 

.............................................................................................................70

Decimal Separator

........................................................................................................ 70

Export Trace to ASCII File 

............................................................................................71

└

File Type 

........................................................................................................ 71

└

Decimal Separator

.......................................................................................... 71

Export all Traces and all Table Results

Selects all displayed traces and result tables (e.g. Result Summary, marker table etc.)
in the current application for export to an ASCII file.

Alternatively, you can select one specific trace only for export (see 

Trace to Export 

).

The results are output in the same order as they are displayed on the screen: window
by window, trace by trace, and table row by table row.

Remote command: 

FORMat:DEXPort:TRACes

 

on page 212

Include Instrument & Measurement Settings

Includes additional instrument and measurement settings in the header of the export
file for result data.

Remote command: 

FORMat:DEXPort:HEADer

 

on page 211

Trace to Export

Defines an individual trace to be exported to a file.

This setting is not available if 

Export all Traces and all Table Results 

is selected.

Decimal Separator

Defines the decimal separator for floating-point numerals for the data export/import
files. Evaluation programs require different separators in different languages.

Trace / Data Export Configuration

Summary of Contents for ZNL Series

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands