Rohde & Schwarz ZNB20, User Manual

Page: 959 / 1332

Command Reference
R&S
®
ZNB/ZNBT
944 User Manual 1173.9163.02 ─ 38
Example: See
SOURce<Ch>:POWer<PhyPt>:CORRection:
TCOefficient:CALibration
Usage: Setting only
Manual operation: See "Recall... / Save..." on page 338
MMEMory:STORe:EYE:MASK <TraceName>, <TraceFile>
Stores a user-defined eye mask to a 7bit ASCII file.
Setting parameters:
<TraceName> Name of the related eye diagram
<TraceFile> String parameter containing the path and file name of the eye
mask file. If the path is omitted, the current directory is used (see
MMEMory:CDIRectory
).
Usage: Setting only
Options: R&S ZNB/ZNBT-K20
Manual operation: See "Save / Load Mask Configuration" on page 597
MMEMory:STORe:EYE:MASK:RESults <TraceName>, <TraceFile>
Saves the detailed results of the mask test in the related eye diagram to an ASCII file
(see
CALCulate<Chn>:EYE:MASK:DATA?
on page 706).
This command will raise an execution error if
CALCulate<Chn>:EYE:MASK:STATe
is
OFF
.
Setting parameters:
<TraceName> The name of the eye diagram whose mask test results shall be
exported
<TraceFile> Mandatory string parameter containing the path and file name of
the file. If the path is omitted, the current directory is used (see
MMEMory:CDIRectory
).
Usage: Setting only
Options: R&S ZNB/ZNBT-K20
Manual operation: See "Export Test Results" on page 594
MMEMory:STORe:EYE:MEASurements <TraceName>, <TraceFile>[,
<DecSeparator>, <FieldSeparator>]
Allows to export eye diagram results to an ASCII file (csv), with the possibility to spec-
ify a decimal separator (comma or point) and a field separator (semicolon, comma, tab
or space).
See also
MMEMory:STORe:EYE:MEASurements
.
SCPI Command Reference