GUI Reference
R&S
®
ZNB/ZNBT
628
User Manual 1173.9163.02 ─ 38
and IP addresses must agree with the entries in the VISA library. The remaining
interface types require composite address formats; see
.
If an instrument is connected to the R&S
ZNB/ZNBT, the entries in the DRIVER
FOR NEW INSTRUMENT panel can be auto-detected for the specified interface
type and address.
●
"Identify" sends an identification query ("IDN?") to the specified device address in
order to identify the type and serial number of the connected generator and select
an appropriate driver file. Generator driver files (
*.gen
) are stored in the
Resources\ExtDev
subdirectory of the analyzer's program directory.
Table 5-6: Interface types for external generators and address formats
Physical
interface
(connector)
Interface
(protocol)
Address
Remarks
LAN
VXI-11
<IpAddress>
e.g.
127.0.0.0
Full VISA resource string:
TCPIP[board]::<Address>[::INSTR]
SOCKET
<IpAddress>::<PortNo>
e.g.
127.0.0.0::50000
LAN connection with pure TCP/IP protocol;
refer to your VISA user documentation.
GPIB
GPIB0 ...
GPIB9
<Address>
e.g.
20
Full VISA resource string:
GPIB[board]::<Address>[::INSTR]
USB
USB-VISA
<ManID>::<ProdID>::<SerialNo>
e.g.
0x0AAD::0x0047::100098
2733 (0x0AAD) is the manufacturer ID of
Rohde & Schwarz.
71 (0x0047) is an example for a R&S prod-
uct ID (R&S SMF100A).
The serial number is device-specific.
LAN or USB Other
Interface-specific, e.g. for SOCKET:
TCPIP0::<IpAddress>::<PortNo>::SOCKET
For USB-VISA:
USB0::<ManID>::<ProdID>::<SerialNo>::INSTR
Use complete VISA resource string.
Remote command:
SYSTem:COMMunicate:RDEVice:GENerator<Gen>:DEFine
5.19.5 External Ports Tab
Allows to set up switch matrices and to redefine physical ports.
Background information
Refer to the following sections:
●
Chapter 4.7.20, "External Switch Matrices"
●
Chapter 4.3.1.2, "Redefined S-Parameters"
Setup Softtool
