Rohde & Schwarz ZNB20, User Manual

Page: 432 / 1332

GUI Reference
R&S
®
ZNB/ZNBT
417 User Manual 1173.9163.02 ─ 38
"Direct Compensation" data files are standard trace files, containing reflection parame-
ter traces for the related port(s) and standard:
Table 5-3: Direct Compensation data
Prompt for Each Port File Type Description
disabled csv One csv trace file per standard,
containing reflection traces for all
selected ports; see
Chap-
ter 4.4.2.2, "ASCII (*.csv) Files" ,
on page 138
enabled s1p One 1-port Touchstone file per
standard and port (see
Chap-
ter 4.4.2.1, "Touchstone Files" ,
on page 135)
Tip: Remote control provides additional flexibility. You can:
●
Measure the same port(s) repeatedly without changing the standards and attribute
the results to different channels.
●
Calculate the compensation data for different ports, using mixed Open and Short
standards.
Refer to the program example for
[SENSe<Ch>:]CORRection:COLLect:
FIXTure[:ACQuire]
.
Remote command:
[SENSe<Ch>:]CORRection:COLLect:FIXTure:STARt
[SENSe<Ch>:]CORRection:COLLect:FIXTure[:ACQuire]
[SENSe<Ch>:]CORRection:COLLect:FIXTure:SAVE
[SENSe<Ch>:]CORRection:COLLect:FIXTure:EXPort
[SENSe<Ch>:]CORRection:COLLect:FIXTure:IMPort
5.7.3 One Way Loss Tab
Defines loss parameters for each physical port.
Use the complementary dock widget to activate or deactivate length/loss compensation
for selected ports (see
Chapter 5.7.1.2, "Offset Panel" , on page 406).
Background information
Refer to the following sections.
●
Chapter 4.6, "Offset Parameters and Embedding" , on page 175
●
Chapter 4.6.1.2, "Definition of Loss Parameters " , on page 176
●
Chapter 4.6.1.4, "Auto Length and Loss" , on page 178
●
Chapter 4.6.1.5, "Fixture Compensation " , on page 179
Offset Embed Softtool