Rohde & Schwarz ZNB20 User Manual Download | Manualshive

Page: 277 / 1332

background image

GUI Reference

R&S

®

ZNB/ZNBT

262

User Manual 1173.9163.02 ─ 38

The way the analyzer fimware activates/deactivates ports after a successfull calibration
(system error correction or power calibration) has slightly changed:

●

In all FW releases, calibrated ports that were previously disabled, are automatically
enabled as single-ended logical ports.

●

Starting with FW version 2.10, uncalibrated ports were disabled in the related
channel(s). If only one of the physical ports forming a balanced port was calibrated,
the balanced port was dissolved and only the uncalibrated (single-ended) port was
disabled.
In earlier FW versions there was no such port deactivation mechanism.

●

Since FW version 2.40 an uncalibrated port is only disabled if it is not used by a
measurement, i.e. if it is not required by any trace of the related channel.

Remote command:
The port parameters in many calibration commands define the calibrated port(s).

Cal Unit

Displays the connected calibration units. The R&S

ZNB/ZNBT auto-detects all calibra-

tion units which are connected to one of its USB ports. If several cal units are connec-
ted, one of them must be selected for calibration (active cal unit). A warning is dis-
played if the current sweep range of the network analyzer exceeds the characterized
frequency range of the calibration unit.

For background information see

Chapter 4.5.5, "Automatic Calibration"

Remote command:

SYSTem:COMMunicate:RDEVice:AKAL:ADDRess:ALL?
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess

Characterization

Displays all characterizations which are stored in the active cal unit. The "Factory"
characterization is available for all calibration units; it ensures an accurate calibration
for all standard applications. To account for a modified test setup (e.g. the connection
of additional adapters to the calibration unit), you can generate modified sets of char-
acterization data using the cal unit characterization wizard; see

Chapter 5.4.2.3, "Char-

acterize Cal Unit Dialog"

on page 327. By default, the R&S

ZNB/ZNBT uses the last

generated cal unit characterization.

Tip:

If the characterization wizard is password-protected, the "Characterization" button

is unavailable. Use this functionality to prevent inadvertent activation of inappropriate
characterizations. See

"Authentication"

See also

Chapter 4.5.5.3, "Characterization of Calibration Units"

Remote command:

[SENSe<Ch>:]CORRection:COLLect:AUTO:CONFigure
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:CATalog?
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:STANdard:CATalog?
SYSTem:COMMunicate:RDEVice:AKAL:SDATa?

Query further cal unit properties:

SYSTem:COMMunicate:RDEVice:AKAL:DATE?
SYSTem:COMMunicate:RDEVice:AKAL:FRANge?
SYSTem:COMMunicate:RDEVice:AKAL:PORTs?
SYSTem:COMMunicate:RDEVice:AKAL:WARMup[:STATe]?

Cal Softtool

«
...
275
276
277
278
279
...
»

Summary of Contents for ZNB20





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZNB20

Brand: Jennov Pages: 50

Brand: Zeversolar Pages: 35

Brand: Zenner Pages: 52

Brand: YOSensi Pages: 3

Brand: bmcm Pages: 5

Brand: Tektronix Pages: 48

Brand: Aqua Lung Pages: 24

Brand: WATERGUARD Pages: 2

Brand: CAS Corporation Pages: 20

Brand: Proteus Pages: 4

Brand: Chauvin Arnoux Pages: 64

1101-3121-0049-800

Brand: S+S Regeltechnik Pages: 16

Brand: Keithley Pages: 338

In-Situ Rugged TROLL 100

Brand: Geotech Pages: 6

Brand: Tusa Pages: 137

AMI INSPECTOR Hydrogen

Brand: Swan Analytical Instruments Pages: 74

Brand: Azbil Pages: 32

Brand: hager Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands