Command Reference
R&S
®
ZNB/ZNBT
1051
User Manual 1173.9163.02 ─ 38
[SENSe<Ch>:]PAE:DCINput:SECondary
<Input>
Selects the secondary DC INPUT connector for the PAE measurement (used for mea-
surement type "Voltage and Current" only; see example). The main DC input
(
) and the secondary DC input must be different
from each other.
Suffix:
<Ch>
.
Channel number
Parameters:
<Input>
DC1 | DC2 | DC3 | DC4
Rear panel connectors DC INPUT 1 ... 4
*RST:
DC2
Example:
See
Manual operation:
See
[SENSe<Ch>:]PAE:PARameters:I
<Current>
Defines the constant DC supply current I
0
for the PAE measurement (measurement
type: "Constant Current Source"; see example).
Suffix:
<Ch>
.
Channel number
Parameters:
<Current>
*RST:
0 A
Default unit: A
Example:
See
Manual operation:
See
[SENSe<Ch>:]PAE:PARameters:R
<Resistance>
Defines the resistance R of the precision resistor used for the PAE measurement
(measurement types: "Constant Voltage Source" or "Voltage and Current"; see exam-
ple).
Suffix:
<Ch>
.
Channel number
Parameters:
<Resistance>
Range:
0 Ohm to 1E+9 Ohm
*RST:
50 Ohm
Default unit: Ohm
Example:
See
Manual operation:
See
SCPI Command Reference
