Rohde & Schwarz ZN-Z84, User Manual

Page: 64 / 78

Operation
R&S
®
ZN-Z84
48 User Manual 1319.5413.02 ─ 02
Parameters:
<SnMask> The LAN subnet mask in dotted decimal format, e.g.
255.255.255.0
.
Manual operation: See "IP address / Subnet Mask / Standard Gateway"
on page 58
SET:LAN:INIT
Activates the previously configured LAN settings (DHCP, IP address, subnet
mask, default gateway).
Use the
WRITE:MXINI
command to persist the LAN settings.
Usage: Event
Manual operation: See "Apply LAN Settings (nonpermanent)" on page 59
5.2.5 Routes
ROUTe
...................................................................................................................48
SHOW:ROUTes?
....................................................................................................49
ROUTe
Creates a set of RF routes (connections from matrix VNA ports to matrix test
ports) or queries the existing routes.
Note that during route creation,
●
existing routes are deleted
●
unconnected matrix test ports are terminated with a 50
Ω
match
If the new route set was successfully created, the SET command returns the cre-
ated routes exactly as the query would do.
If the new route set is invalid, either because it is empty, involves non-existing
ports or contains multiple routes for the same port(s), an
1,"ROUTE ERROR"
is
returned and the existing routes are preserved.
Remote Control – Commands