Rohde & Schwarz VSE-K149, User Manual

Page: 20 / 143

Configuration
R&S
®
VSE-K149
20 User Manual 1179.3315.02 ─ 01
Preset Channel
Select the "Preset Channel" button in the lower left-hand corner of the "Overview" to
restore all measurement settings
in the current channel to their default values.
Remote command:
SYSTem:PRESet:CHANnel[:EXEC]
on page 53
4.2 Input and Frontend Settings
Access : "Overview" > "Input/Frontend"
The R&S VSE can evaluate signals from different input sources and provide various
types of output (such as trigger signals).
The frequency and amplitude settings represent the "frontend" of the measurement
setup.
● Input Source Settings ..............................................................................................20
● Frequency Settings ................................................................................................. 28
● Amplitude Settings .................................................................................................. 29
4.2.1 Input Source Settings
Access : "Overview" > "Input/Frontend" > "Input Source"
Or : "Input & Output" > "Input Source"
The R&S VSE can control the input sources of the connected instruments.
● Radio Frequency Input ............................................................................................20
● I/Q File Input ............................................................................................................26
4.2.1.1 Radio Frequency Input
Or : "Input & Output" > "Input Source" > "Radio Frequency"
The default input source for the connected instrument is "Radio Frequency". Depend-
ing on the connected instrument, different input parameters are available.
Input and Frontend Settings