Basic R&S
TSME Functions
R&S
®
TSME
44
User Manual 1514.6542.02 ─ 10
Label
Description
Product Change Index
Version of the controller board
Temperature
Current temperature of the hardware in [°]C
RF Board
Serial Number
Unique ID of the RF board
Product Change Index
Version of the RF board
Temperature
Current temperature of the hardware in [°]C
Correction Data
Version
Current version of the calibration data saved on the device
Type
●
Factory
The original factory calibration data are saved on the device.
●
Update
An improved set of calibration data is available on saved on the
device. (See
Date
Timestamp of creating and saving the calibration data on the device
TCXO Date
Date of correction data for the internal reference
Device Analysis Output
Furthermore, any warnings, errors or information concerning the device status that
may be available are displayed in the "Device Analysis Output" table. This table is
available on all tabs, at the bottom of the R&S
TSME Device Manager window.
Depending on their relevance, the messages are assigned to the following categories:
●
info
: information for the user, no action required
●
warning
: warning on behalf of the instrument - should be solved
●
error
: error on behalf of the instrument - must be solved before further operation
In case measurement problems occur with the R&S
TSME, check the "Device Analysis
Output" table for any errors that may have been detected. If available, a repair function
is provided. See also
Identifying the currently selected device
If several R&S
TSMEs are connected to the host PC and are detected by the
R&S
TSME Device Manager, you may not be able to determine which of the (physical)
devices is currently selected for configuration. When you select the "Identify" button,
the STATE LED and the LAN LEDs on the rear panel of the device with the selected
serial number start blinking rapidly for several seconds.
Obtaining Device Information
