Basic R&S
TSME Functions
R&S
®
TSME
49
User Manual 1514.6542.02 ─ 10
Risk of inoperability of device due to FPGA update
Before performing an update, make sure you have a stable power supply and the LAN
connection will not be interrupted. Both updates take a few minutes.
If the LAN connection is interrupted during an FPGA update, the device may become
inoperable. Thus, only install such an update if it is explicitly recommended by a mes-
sage in the "Device Analysis Output" of the R&S
TSME Device Manager or by the
Rohde
&
Schwarz support center.
You can update the basic FPGA or the correction data on your R&S
TSME directly
from the R&S
TSME Device Manager, in the "Update" tab. The currently installed ver-
sions and the newest supported version (of the FPGA) or the minimum recommended
version (of the correction data) are indicated.
To perform an update
1. In the R&S
TSME Device Manager, select the serial number of the R&S
TSME to
be updated.
2. In the "Update" tab, select the "Update" button for either the basic FPGA or the cor-
rection data.
Obtaining Firmware and Correction Data Updates
