Front and Rear Panel Description
R&S
®
TSME
40
User Manual 1514.6542.02 ─ 10
For details see
Chapter 2.2.1, "Connecting the DC Power Supply"
RF IN 50 Ω Connector
The optional multi-band RF antenna (700
MHz to 2.6
GHz) or the device providing the
RF signal is connected to the instrument's [RF Input] via a cable equipped with an
appropriate connector (N female, 50 Ω input impedance, VSWR type 2.0).
Risk of instrument damage
Do not overload the maximum allowed input of 20dBm. Noncompliance will destroy the
input mixer.
Depending on the intended use, the respective valid regulations regarding lightning
protection of the antennas and regarding vehicle installation must be observed during
installation.
GPS antenna connector
An SMA connector is provided for the supplied external active GPS antenna.
Antenna power: 3V, max. 25mA
Depending on the intended use, the respective valid regulations regarding lightning
protection of the antennas and regarding vehicle installation must be observed during
installation.
Rear Panel