Installation and Commissioning
R&S
®
TS7124AS
33
Instructions Handbook 1179.2948.02 ─ 01
Figure 6-8: Connecting the compressed-air supply
9. Check whether the connection is tight. If compressed air is leaking at the connec-
tion, you can hear it or feel it with a wetted finger.
10. If you want to connect the push-pull adapter to the quick-coupling plug of multiple
chambers, repeat
and
6.5
Connecting to Control and Power
The DC power socket and the control interfaces are at the rear of the chamber.
Figure 6-9: Detail views of the left and right arrays of supply and control connectors and control
screws on the rear side of the R&S
TS7124AS
1 = Control screw for door opening speed, see
Chapter 6.8, "Adjusting the Door Speed"
2 = Control screw for door closing speed, see
Chapter 6.8, "Adjusting the Door Speed"
3 = Grounding terminal (earth ground contact)
4 = Quick-coupling plug KS3-1/8-A for compressed air
Connecting to Control and Power
