Rohde & Schwarz SMM100A, User Manual

Page: 972 / 1088

Remote control commands
R&S
®
SMM100A
972 User Manual 1179.1341.02 ─ 05
Parameters:
<Address> integer
Range:
0 to 30
*RST: n.a. (factory preset: 28)
Example: See Example "Finding out the used VISA resource strings"
on page 962.
Manual operation: See "GPIB Channel Address" on page 603
:SYSTem:COMMunicate:HISLip:RESource?
Queries the VISA resource string. This string is used for remote control of the instru-
ment with HiSLIP protocol.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA resource strings"
on page 962.
Usage: Query only
Manual operation: See "HISLIP" on page 602
See "GPIB" on page 602
:SYSTem:COMMunicate:NETWork:IPADdress <IpAddress>
Sets the IP address.
Parameters:
<IpAddress> string
Range:
0.0.0.0. to ff.ff.ff.ff
Example: See Example "Retrieving information on network-related set-
tings" on page 961.
Manual operation: See "IP Address" on page 600
:SYSTem:COMMunicate:NETWork:IPADdress:MODE <Mode>
Selects manual or automatic setting of the IP address.
Parameters:
<Mode> AUTO | STATic
*RST:
n.a. (factory preset: AUTO)
Example: See Example "Retrieving information on network-related set-
tings" on page 961.
Manual operation: See "Address Mode" on page 600
SYSTem subsystem