Remote control commands
R&S
®
SMM100A
880
User Manual 1179.1341.02 ─ 05
[:SOURce<hw>]:CORRection:ZERoing:STATe
<State>
Activates the zeroing procedure before filling the user correction data acquired by a
sensor.
Parameters:
<State>
1 | ON | 0 | OFF
*RST:
1
Example:
See
Example "Fill user correction data with sensor"
Manual operation:
See
"Fill User Correction Data with Sensor"
[:SOURce<hw>]:CORRection:CSET:DATA[:SENSor<ch>][:POWer]:SONCe
Fills the selected user correction list with the level values measured by the power sen-
sor for the given frequencies.
Suffix:
SENSor<ch>
.
Defines the used power sensor, i.e. the sensor whose values are
used.
Example:
See
Example "Fill user correction data with sensor"
Usage:
Event
[:SOURce<hw>]:CORRection[:STATe]
<State>
Activates user correction with the currently selected table.
Parameters:
<State>
1 | ON | 0 | OFF
*RST:
0
Example:
See
Example "Create a table with user-defined correction values
Manual operation:
See
[:SOURce]:CORRection:CSET:CATalog?
Queries a list of available user correction tables.
Return values:
<Catalog>
string
List of list filenames, separated by commas
Example:
See
Example "Create a table with user-defined correction values
Usage:
Query only
SOURce subsystem