Rohde & Schwarz SMM100A, User Manual

Page: 842 / 1088

Remote control commands
R&S
®
SMM100A
842 User Manual 1179.1341.02 ─ 05
Parameters:
<Divider> integer
Range:
2 to 1024
*RST: 2
Example: See Example "Managing waveform files" on page 796
Manual operation: See "Marker Mode" on page 161
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:PULSe:FREQuency?
Queries the pulse frequency of the pulsed marker signal. The pulse frequency is
derived by dividing the symbol rate by the divider.
Return values:
<Frequency> float
Increment: 0.001
Example: see Example "Managing waveform files" on page 796
Usage: Query only
Manual operation: See "Marker Mode" on page 161
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:DELay <Delay>
Defines the delay between the signal on the marker outputs and the start of the sig-
nals.
Parameters:
<Delay> integer
Range:
0 to depends on other values
Increment: 1
*RST:
0
Default unit: Symbol
Example: See Example "Managing waveform files" on page 796.
Manual operation: See "Marker x Delay" on page 113
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:DINSec?
Queries the marker delay in microseconds.
You can define a marker delay in samples with
[:SOURce<hw>]:BB:ARBitrary:
TRIGger:OUTPut<ch>:DELay
.
Return values:
<DelayInS> float
Range:
0 to 16777215
Increment: 1E-3
*RST:
0
SOURce subsystem