Rohde & Schwarz SMM100A, User Manual

Page: 839 / 1088

Remote control commands
R&S
®
SMM100A
839 User Manual 1179.1341.02 ─ 05
Example: See Example "Specifying delay and inhibit values in time units"
on page 798
Manual operation: See "(External) Delay Unit" on page 111
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:DELay <Delay>
Specifies the trigger delay in samples.
Maximum trigger delay and trigger inhibit values depend on the installed options. See
"Specifying delay and inhibit values" on page 101.
Parameters:
<Delay> float
Range:
0 to depends on the sample rate
Increment: 0.01
*RST:
0
Default unit: sample
Example: see Example "Managing waveform files" on page 796
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 112
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:TDELay <ExtTimeDelay>
Specifies the trigger delay for external triggering. The value affects all external trigger
signals.
Maximum trigger delay and trigger inhibit values depend on the installed options. See
"Specifying delay and inhibit values" on page 101.
Parameters:
<ExtTimeDelay> float
Range:
0 to 2147483647 / (clock frequency)
Increment: 1E-9
*RST:
0
Default unit: s
Example: See Example "Specifying delay and inhibit values in time units"
on page 798.
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 112
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
SOURce subsystem