Rohde & Schwarz SMM100A, User Manual

Page: 838 / 1088

Remote control commands
R&S
®
SMM100A
838 User Manual 1179.1341.02 ─ 05
Example: See Example "Managing waveform files" on page 796
Usage: Event
Manual operation: See "Arm" on page 110
[:SOURce<hw>]:BB:ARBitrary:TRIGger:EXECute
Executes an internal trigger event.
Example: See Example "Managing waveform files" on page 796
Usage: Event
Manual operation: See "Execute Trigger" on page 110
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:SYNChronize:OUTPut
<Output>
Enables signal output synchronous to the trigger event.
Parameters:
<Output> 1 | ON | 0 | OFF
*RST:
1
Example: See Example "Managing waveform files" on page 796
Manual operation: See "Sync. Output to External Trigger/Sync. Output to Trigger"
on page 111
[:SOURce<hw>]:BB:ARBitrary:TRIGger:PTIMe?
between the input of the external trigger event and the output of the baseband signal.
Return values:
<ArbTrigProcTime> string
Example: SOURce1:BB:ARBitrary:TRIGger:PTIMe?
// Response: "210 µs"
The internal processing time is 210 µs.
Usage: Query only
Manual operation: See "Processing Time" on page 161
[:SOURce<hw>]:BB:ARBitrary:TRIGger:DELay:UNIT <TrigDelUnit>
Sets the units the trigger delay is expressed in.
Parameters:
<TrigDelUnit> SAMPle | TIME
*RST:
SAMPle
SOURce subsystem