Remote control commands
R&S
®
SMM100A
785
User Manual 1179.1341.02 ─ 05
Parameters:
<Output>
1 | ON | 0 | OFF
*RST:
1
Example:
See
Example "Adjusting clock, marker and trigger settings"
Manual operation:
See
"Sync. Output to External Trigger/Sync. Output to Trigger"
[:SOURce<hw>]:BB:DM:TRIGger:ARM:EXECute
Stops signal generation; a subsequent internal or external trigger event restart signal
generation.
Example:
Example "Adjusting clock, marker and trigger settings"
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:BB:DM:TRIGger:EXECute
Executes a trigger.
Example:
See
Example "Adjusting clock, marker and trigger settings"
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:BB:DM:TRIGger:DELay:UNIT
<TrigDelUnit>
Determines the units the trigger delay is expressed in.
Parameters:
<TrigDelUnit>
SAMPle | TIME
*RST:
SAMPle
Example:
See
Example "Specifying delay and inhibit values in time units"
Manual operation:
See
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:DELay
<Delay>
Specifies the trigger delay in symbols.
Maximum trigger delay and trigger inhibit values depend on the installed options. See
"Specifying delay and inhibit values"
SOURce subsystem