Rohde & Schwarz SMM100A, User Manual

Page: 769 / 1088

Remote control commands
R&S
®
SMM100A
769 User Manual 1179.1341.02 ─ 05
Parameters:
<POffset> float
Range:
0 to 359.9
Increment: 0.01
*RST:
0
Default unit: DEG
Example:
SOURce1:BB:POFFset 0.5DEG
Manual operation: See "Phase Offset" on page 260
[:SOURce<hw>]:BB:ROUTe <Route>
[:SOURce<hw>]:BBIN:ROUTe <Route>
Selects the signal route for the internal/external baseband signal.
Parameters:
<Route> A
Example:
SOURce1:BBIN:ROUTe A
[:SOURce<hw>]:BB:POWer:PEAK?
Queries the peak level of the baseband signal relative to full scale of 0.5 V (in terms of
dB full scale).
Return values:
<Peak> float
Range:
-145 to 30
Increment: 0.01
*RST:
0
Default unit: dBfs
Example: BB:POW:PEAK
Queries the peak level of the baseband signal.
Usage: Query only
[:SOURce<hw>]:BB:CFACtor?
Queries the crest factor of the baseband signal.
Return values:
<CFactor> float
Range:
0 to 100
Increment: 0.01
*RST:
0
Default unit: dB
Example: SOURce1:BB:CFACtor?
Queries the crest factor of the baseband signal.
Usage: Query only
SOURce subsystem