Rohde & Schwarz SMM100A, User Manual

Page: 675 / 1088

Remote control commands
R&S
®
SMM100A
675 User Manual 1179.1341.02 ─ 05
:CALibration<hw>:ALL:TIME?
Queries the time elapsed since the last full adjustment.
Return values:
<Time> string
Example:
CAL:ALL:TIME?
// "22 days"
Usage: Query only
Manual operation: See "Time" on page 1022
:CALibration:ALL:WARN <UncalWarning>
Generates a warning message, if the instrument is in uncalibrated state.
Parameters:
<UncalWarning> 1 | ON | 0 | OFF
*RST:
0
Example:
CALibration:ALL:WARN 1
:CALibration:DATA:FACTory:DATE?
Queries the date of the last factory calibration.
Return values:
<Date> string
Example:
CAL:DATA:FACT:DATE?
// "2016-01-01"
Usage: Query only
Manual operation: See "Last Factory Calibration" on page 1006
:CALibration<hw>:CONTinueonerror <State>
Continues the calibration even though an error was detected. By default adjustments
are aborted on error.
Suffix:
<hw>
.
[1]
Optional suffix
Parameters:
<State> 1 | ON | 0 | OFF
*RST:
n.a. (factory preset: 0)
Example:
CAL:CONT ON
// Continues calibration after an error
Manual operation: See "Continue Adjustment on Error" on page 1023
CALibration subsystem