Remote control commands
R&S
®
SMM100A
667
User Manual 1179.1341.02 ─ 05
Usage:
Query only
:MMEMory:CDIRectory
<Directory>
Changes the default directory for mass memory storage. The directory is used for all
subsequent
MMEM
commands if no path is specified with them.
Parameters:
<Directory>
<directory_name>
String containing the path to another directory. The path can be
relative or absolute.
To change to a higher directory, use two dots '..' .
Usage:
SCPI confirmed
Manual operation:
See
"Directory, File List and Filename"
See
:MMEMory:COPY
<SourceFile>[,<DestinationFile>]
Copies an existing file to a new file. Instead of just a file, this command can also be
used to copy a complete directory together with all its files.
Setting parameters:
<SourceFile>
string
String containing the path and file name of the source file
<DestinationFile>
string
String containing the path and name of the target file. The path
can be relative or absolute.
If
<DestinationFile>
is not specified, the
<SourceFile>
is
copied to the current directory, queried with the
Note:
Existing files with the same name in the destination direc-
tory are overwritten without an error message.
Usage:
Setting only
SCPI confirmed
Manual operation:
See
:MMEMory:DATA
<Filename>, <BinaryBlock>
:MMEMory:DATA?
<Filename>
The setting command writes the block data
<BinaryBlock>
to the file identified by
<Filename>
.
Tip:
Use this command to read/transfer stored instrument settings or waveforms
directly from/to the instrument.
Parameters:
<BinaryBlock>
#<number><length_entry><data>
MMEMory subsystem
